ARMED CITIZEN EDUCATORS

The “Universal” Clipdraw attaches in seconds with 3M Corp. #4941 VHB (very high bond) double coated tape. VHB tape is used in the construction and aircraft industries as a replacement for rivets. It provides a 20 lb. continuous bond that resists oil, solvents, heat and vibration. Heavy recoil and rapid slide movement have no effect on the bond strength between gun and Clipdraw. The Clipdraw stays solidly in place with adhesion actually increasing over time. The “Universal” Clipdraw consists of two parts. The mounting plate attaches to the gun with the double coated tape. The clip part screws to the mounting plate with two 1/8″ button head screws.

Switching to a holster is simple. Just remove the clip part and in most cases the gun can be holstered with the low profile mounting plate left in place. No need to remove and replace the tape each time. 

SEMI-AUTOMATICS (virtually all models) — confirm by checking gun for required mounting space.

• Mounting plate attaches on either side of the slide or frame with VHB double sided tape.
• Mounting requires just 3″ × ¼″ of flat surface that can include grooved or textured areas.
• Clip part screws securely to the mounting plate.
• Compatible with all ambidextrous safeties and most Laser Grips.
• Adjustable for depth of carry.
  

The “Universal” Clipdraw attaches in seconds with 3M Corp. #4941 VHB (very high bond) double coated tape. VHB tape is used in the construction and aircraft industries as a replacement for rivets. It provides a 20 lb. continuous bond that resists oil, solvents, heat and vibration. Heavy recoil and rapid slide movement have no effect on the bond strength between gun and Clipdraw. The Clipdraw stays solidly in place with adhesion actually increasing over time. The “Universal” Clipdraw consists of two parts. The mounting plate attaches to the gun with the double coated tape. The clip part screws to the mounting plate with two 1/8″ button head screws.

Switching to a holster is simple. Just remove the clip part and in most cases the gun can be holstered with the low profile mounting plate left in place. No need to remove and replace the tape each time 

REVOLVERS (virtually all models) — confirm by checking gun for required mounting space.

• Mounting plate attaches on the right side below the cylinder with VHB double sided tape.
• Requires just 2¾″ × ¼” of flat surface on the right side below the cylinder.
• Clip part screws securely to the mounting plate.
• Mounts on the right side only. Left side mounting would prevent cylinder from opening.
• Not compatible with Laser Grips.
• Adjustable for depth of carry.
  

• Mounts on either side of the slide

• Made from specially tempered spring steel with black oxide coating, Clipdraws are available to fit standard or large frame Glocks. The Clipdraw comes with a slide cover plate that replaces the original and is drilled and tapped for attaching the Clipdraw.

  • Part #GS fits models: 17, 19, 22, 23, 24,25, 26, 27, 28,31, 32, 33, 34, 35, 36
  • Part #GL fits models: 20, 21, 21SF, 29, 30, 30SF, 37, 38, 39

   

• Mounts on either side of the slide

• Made from specially tempered spring steel with black oxide coating, Clipdraws are available to fit standard or large frame Glocks. The Clipdraw comes with a slide cover plate that replaces the original and is drilled and tapped for attaching the Clipdraw.

  • Part #GS fits models: 17, 19, 22, 23, 24,25, 26, 27, 28,31, 32, 33, 34, 35, 36
  • Part #GL fits models: 20, 21, 21SF, 29, 30, 30SF, 37, 38, 39

• Mounts on the right side only — under the grip plate.
• Not compatible with ambidextrous safeties that extend under the grip plate.For guns with under-the-grip ambidextrous safeties see Clip Draw #SA.

• Made from specially tempered spring steel with black powder coating or nickel plating.

  Clipdraw fits these fine hand guns:

  • Part #1911 fits: Model 1911 Standard Frame, Model 1911 Commander
  • Part #OM fits: Colt Officer’s Model, Colt Defender, Colt Compact

  PLEASE NOTE: Parts #1911 and #OM will fit custom clones built on these EXACT same frames. Parts #1911 and #OM will NOT fit other models such as Para-Ordnance, Beretta, Browning, Glock, etc.

• Mounts on the right side only — under the grip plate.
• Not compatible with ambidextrous safeties that extend under the grip plate.
• For guns with under-the-grip ambidextrous safeties see Clip Draw #SA.

• Made from specially tempered spring steel with black powder coating or nickel plating.

  Clipdraw fits these fine hand guns:

  • Part #1911 fits: Model 1911 Standard Frame, Model 1911 Commander
  • Part #OM fits: Colt Officer’s Model, Colt Defender, Colt Compact

  PLEASE NOTE: Parts #1911 and #OM will fit custom clones built on these EXACT same frames. Parts #1911 and #OM will NOT fit other models such as Para-Ordnance, Beretta, Browning, Glock, etc.

• Mounts on the right side only. Left side mounting would prevent cylinder from opening.
• Not Compatible with Laser Grips.
• Will not fit revolvers from any other manufacturers.

• Made from specially tempered spring steel with black powder coating or nickel plating.

  Clipdraws are available to fit Smith & Wesson J frame revolvers. Custom round head screws are included to replace the OEM countersunk screws.

  • Part #JF fits J frames ONLY.

  PLEASE NOTE: #JF will ONLY fit revolvers manufactured by Smith & Wesson.